KME - Tapered Diamond Rod for Serrated Blades
Tapered Diamond Rod for Serrated Blades
Finally you can easily sharpen your serrated knives and broadheads!
The KME tapered diamond rods for serrated blades screw onto the guide rods included in our KME Knife Sharpening System. Then all you have to do is mount your blade in the knife sharpening jig and touch up all the serration grooves.
Note: The guide rod and sharpening system are not included when you purchase these needle files.
KME- Chosera Water Stones 8-Stone Set
400 Grit Chosera Water Stone (Green)
600 Grit Chosera Water Stone (Blue)
800 Grit Chsera Water Stone (Peach)
1000 Grit Chosera Water Stone (Green) The Chosera 1000 grit is perhaps the best 1000 grit water stone on the market in terms of performance, feedback and speed. It is an excellent transition stone from the DMT diamonds or coarser synthetic stock stones, and is still able to do less intensive profiling and repair work. It more quickly produces an edge on par with the White (soft) Arkansas stone, and leaves a very usable working edge.
2000 Grit Chosera Water Stone (Tan) The Chosera 2000 grit is the perfect transition stone between the 1000 and 3000 grit stones.
3000 Grit Chosera Water Stone (Brick Red) The 3000 grit Chosera is an intermediate stone that leaves superb working edges that are more refined than the Arkansas black and translucent stones, and best used after the stock KME synthetics and coarser Choseras. Depending on the finish you desire, the 3000 grit Chosera can be used as a cleanup stone before the translucent Arkansas stone.
5000 Grit Chosera Water Stone (Gray) The 5000 grit Chosera takes your edges to a new level of refinement. It's smooth with a little bit of "bite", and is a good follower from the 1000 grit, and 3000 grit Choseras or either the black or translucent Arkansas stones.
10000 Grit Chosera Water Stone (Pale Green) The 10000 grit Chosera is best used after refining with the 5000 grit Chosera, and takes your edges to even higher levels. The shine of the finish alone is enough to impress, but the functionality of such a highly refined edge really speaks for itself.
KME Precision Knife Sharpening System - Big Daddy Set
KME Precision Knife Sharpening System- Adjustable Stop Collar, rod not included!
rod shown for ilustration purposes only, not included!
This adjustable stop collar with knurled thumb nut fits our standard guide rods as well as our convex sharpening guide rods.
The stop collar is placed between the stone carrier and the ball and race assembly. It's position is adjusted so that the front edge (knob end) of the stone can't come up onto the side of the blade which would scratch your knife.
This is a handy accessory item that should be in everyone's kit.
KME - Pen Knife Pro Jaws
KME Pen Knife Pro Jaws
You’ve been asking us for these for a long time!
We’ve been listening too so we’re introducing the Pen knife Pro Jaws designed specifically for sharpening very narrow traditional gentleman’s folders and pen knives ...and at very low bevel angles too.
Wait till you see what you can do with these!
NEW KME pen knife pro jaws handle all these small knives made in the U.S.A.
Pictured are just a few samples of knives which previously have been difficult or impossible to sharpen with any traditional clamp type sharpening system ...but not anymore!
Saber grinds, full flat grinds, and even full hollow ground blades are held securely with no need to tape or shim the blades.
Using the KME Generation II with the Pen Knife Pro Jaws you can sharpen even the smallest blades at angles down to 17 degrees. ...and many knives can be sharpened at even lower angles than that.
How small and narrow of a blade can the Pen Knife Pro Jaws sharpen?
NEW KME pen knife pro jaws made in the U.S.A.
Here’s one of the smallest blades we could find:
Victorinox SD Classic
Blade: 1-5/16” long x .228” wide
Grind: Full flat
Lowest Setting: 17 Degrees
Actual Sharpening Angle: 17 Degrees
KME Axe Sharpening System
Produce and maintain true radius convex bevels with a guided system!
The first guided system designed specifically for axes. Sharpening your axes, hatchets, and hawks has never been so easy.
Produces true radius convex bevels or standard flat V grinds.
Patent pending magnetic base holds securely to your axe and can be placed in a variety of positions to sharpen axes,
hatchets, and hawks of various shapes and sizes. The upper angle guide pivots to work on both sides of the axe.
Kit includes:
Instruction manual
Axe sharpening fixture with magnetic base and pivoting micro adjustable angle guide
Stone carrier (Accepts either guide rod)
A straight guide rod for V grind sharpening
A radius convex guide rod which creates and maintains true convex bevel geometry
1 XXC-100 grit diamond stone (For profiling or repairing damaged edges)
1 Coarse 120 grit aluminum oxide ceramic stone
1 Medium 320 grit aluminum oxide ceramic stone
1 Fine grit hard Arkansas stone
Sharpie marker
Shop rag
Bottle honing oil
All in a compact, portable zippered pouch
NOTE: Additional accessory stones are available on our website. From extremely coarse 50 grit diamond to extra fine stones and strops.
KME Axe Sharpening Fixture
Now you can produce and maintain true radius convex bevels with your KME system!
This accessory fixture is designed specifically for axes. Sharpening your axes, hatchets, and hawks has never been so easy.
Produces true radius convex bevels when used with our convex guide rod, or flat V grinds when used with our standard straight guide rod.
Patent pending magnetic base holds securely to your axe and can be placed in a variety of positions to sharpen axes,
hatchets, and hawks of various shapes and sizes. The upper angle guide pivots to work on both sides of the axe.
Works with the standard KME stone carrier, guide rods, and stones.
This is the Accessory axe fixture only.
For people who already have the KME Knife Sharpening System, stone carrier, guide rod, and stones.